| ENGINE | |
| Emission Standard | Euro 5 |
| Make /Mode | KUBOTA /D1703 |
| Power /Rotation speed | 18.5kw(25HP)@2200rpm |
| Type | In-line,water cooled, 4-stroke ,mechanical pump, normally aspirated |
| Number of cylinder | 3 |
| Max.torque | 97.4N.m/1500rpm |
| Displacement | 1.642L |
| TRACK SYSTEM | |
| Maximum Travel speed | |
| Maximum Travel speed(High/low) | 4.4/2.4km/h |
| Width of (Steel)track shoe | 300mm |
| Number of track shoe per side | |
| Number of upper roller per side (Carrier roller) | 1 |
| Number of bottom roller per side (Supporting roller) | 4 |
| PERFORMANCE PARAMETER | |
| Standard Bucket capacity | 0.12m³ |
| Swing speed | 12rpm |
| Maximum Grade ability | 58%(30°) |
| Maximum Bucket digging force | 30.4KN |
| Maximum Arm digging force | 18.2KN |
| Hydraulic system pressure | 22.5Mpa |
| Ground pressure | 32Kpa |
| Machine weight | 3810kg |
| Machine weight(with canopy) | |
| Machine weight(with closed cabin) | |
| Fuel tank capacity | 40L |
| Hydraulic oil tank capacity | 44L |
| Boom length | 2535mm |
| Arm length | 1400mm |
| Engine oil capacity | 7L |
| Radiator capacity | 3.8L |
| Final drive | 2*0.7L |
| MACHINE SIZE | |
| Overall dimension (L*W*H) | 4915mm*1720mm*2525mm |
| Height of cabin | |
| Track length on ground(Axle base) | 1670mm |
| Track gauge | 1420mm |
| Minimum Ground clearance | 295mm |
| Swing radius at tail | 860mm |
| Length of rubber track | 2154mm |
| Swing radius at front | 2538mm |
| Height of blade | 350mm |
| WORKING RANGE | |
| Maximum Digging height | 4800mm |
| Maximum Dumping height | 3406mm |
| Maximum Digging depth | 3208mm |
| Maximum Vertical digging depth | 2957mm |
| Maximum Digging radius | 5480mm |
| Minimum swing radius | 2530mm |
| Maximum Digging distance (on ground) | 5359mm |
| Maximum Lifting height of blade | 365mm |
| Maximum Cutting depth of blade | 385mm |
| Boom swing angle(Left/Right) | 55°/65° |
| Max.height when min.swing radius | 3655mm |
JH35
Description
